Call us at 732 292-1994 or 800 867-6690   |  Email us at  |  Visite us on


Customised products

Customised Products >> Customised products

Customised products

The products detailed below are examples from the extensive list of custom designed and built products which Carbolite has manufactured. If you are looking for a similar product, or require a product for a special application, we would be pleased to discuss this with you.


Special heat treating test furnace

  • Designed to rapidly heat a compound to a liquid state in a ceramic crucible;
  • Maximum operating temperature : 1100°C;
  • To protect the heating elements and insulation from the aggressive characteristics of the liquid solution, an alloy liner extends the full length of the internal chamber to ;
  • The system is designed for easy up/down movement of a vertical tube furnace - this allows for convenient insertion and removal of the fixed pedestal supported crucible from the furnace chamber;
  • With the furnace in the lowered position, and the crucible and molten solution exposed, a second step in the process occurs when a metal block is inserted into the solution;
  • A temperature monitoring thermocouple is then brought down into the metal block and crucible, at which point the furnace is again raised to heat the total load to the desired temperature.

Furnace for thermal testing of turbine blade materials

  • Fully automated custom designed furnace system incorporating a two axis robot arm and mechanism which picks a single billet from a multiple storage tray and positions it on the furnace loading hearth;
  • The sample is then raised into the furnace hot zone for a specified time and then removed;
  • This thermal cycling system provides a fully automated process to calibrate thermal indicator paints of test samples in the simulation of temperature experienced by turbine blades.


Large bore split tube furnace

  • Large bore split tube furnace to accommodate 250mm diameter tube;
  • Incorporates far-hinge vertical stand design for ease of use;
  • Each furnace half can be opened completely away from the vertically supported tube;
  • Split design allows fast cooling of process;
  • A separate control cabinet is connected to the furnace with 2m conduit.

400°C Clean room oven

  • Custom size Class 10,000 clean room oven;
  • Designed to heat treat arterial stents;
  • The chamber is divided into four independent zones of control;
  • The multi-zone design, combined with four top mounted fans, provides excellent thermal uniformity;
  • A movable trolley is provided to easily insert / remove a load support from the heated chamber.

Thermal cycling rig

  • For long term thermal cycling at temperatures up to 1200°C to evaluate performance of new bond-coat/ceramic layers
  • Vertical tube furnace with electrically operated hearth below it, which holds the coating samples for evaluation
  • When the thermal cycle starts, the samples are raised into the hot zone and the furnace is heated to 1135°C
  • After one hour at temperature, the samples are lowered into a quench area and cooled to 80°C; they are then automatically raised back into the hot zone and the cycle starts again
  • Each thermal cycle lasts approximately 70 minutes and up to 20 cycles/day can be completed in 24 hours.


Split tube furnaces

  • Vertically split furnace designed for tensile testing
  • A 10mm wide slot on the split line of the two halves accepts an extensometer
  • Working zone : 80mm diameter x 70mm heated length
  • Maximum working temperature : 1600°C
  • Heated by molybdenum disilicide 'U' tupe elements
  • Single zone control
  • Power rating : 1.4kW

Rotating tube furnace

  • Specially designed tube furnace for powder processing
  • Maximum operating temperature : 1200°C
  • Heated length of 1000mm, divided into three independently controlled zones to allow a temperature gradient to be achieved
  • Total work tube length is 1800mm
  • Up to 5 litres of material can be processed at any one time under an inert atmosphere
  • A rotating work tube, which can be tilted to control throughput, ensures there is minimal agglomeration
  • The speed of rotation can be adjusted from 2rpm to 12rpm and the angle of tilt between 0 - 10° from horizontal
  • Material is fed into the 75mm diameter work tube via a vibrating feeder equipped with a speed controller and five litre hopper


Rotating tube furnace

  • Designed to cure coatings on fine powders which are used for vitreous enamelling
  • Maximum temperature : 500°C
  • Tube heated length : 2000mm
  • Temperature uniformity ± 10°C over central area
  • 3 zones
  • Power rating 90kW

8-zone gradient tube furnace

  • For the evaluation of refractories, tiles, sanitaryware, tableware and asscociated products
  • Maximum temperature - 1600°C
  • All zones reach 1250°C from ambient in 40 minutes
  • Heated length - 800mm
  • Heating is provided by 32 silicon carbide spiral cut elements (4 to each zone mounted vertically down both sides of the heated chamber)
  • Maximum power 18kW

Customised products

Customised products


1. EXPERIENCED-We have been building labs, equipping labs, and supplying lab equipment parts and service for over 20 years. With over 100 years of combined lab equipment experience at our site and working with many experienced technicians, we try to offer the right equipment at the right price for you, our partner.

2. SAVE MONEY- We sell, lease, and rent - You save money, 5-70% off original retail, so you get great equipment at a great price.

3. WARRANTY -We offer a warranty on our refurbished equipment and new manufacturer warranty on new equipment.

4. SERVICE- We offer instrument service, refurbishment validations, and calibrations at great rates and skill levels.

5. INSTRUMENT PARTS- We sell new instrument parts and new equipment parts and hard to find used older parts

6. UNIQUE- We are an independent dealer and also sell used instruments, such as AA, FTIR, GC, GC/MS, HPLC, LC/MS, ICP, ICP/MS, Particle Size Analysis, UV/VIS, and UV/VIS/NIR. This equipment is manufactured by companies like Agilent, Hewlett Packard, Waters, Hitachi, Perkin Elmer, Shimadzu, Beckman, and more. WE ARE NOT AFFILIATED WITH THESE COMPANIES IN ANY WAY!

7. BUILD LABS- We well discounted made in USA Lab Casework, Fume hoods, Blowers, Safety Cabinets, and Clean Benches.

8. CASH PAID-Top dollar paid, and you can sell your excess, obsolete, surplus equipment with us. We can buy it or sell on consignment.

9. DIVERSIFIED-We sell a very broad line of new and used Lab Equipment. See our detailed listing above.