Call us at 732 292-1994 or 800 867-6690 | Email us at firstname.lastname@example.org | Visite us on
Yamato ADP-21 Vacuum Oven Yamato ADP-31 Vacuum Oven Yamato ADP21 Yamato ADP31 Yamato model ADP-21 Yamato model ADP-31 Vacuum Drying Ovens greatly simplify the heating of samples at pressures below atmospheric.
Chamber Size 200MM ×250MM ×200MM
|Electrical Requirements:||115VAC, 10A, 50/60Hz.|
|Operating Temperature Range:||Room temp.+5°C to 240°C.|
|Temperature Control Accuracy:||±1.5°C (at 240°C).|
|Method used:||Vacuum drying by decompressed chamber direct heating.|
|Operating Pressure Range:||14.65 psi to 0.0145 psi (101 to 0.1 kPa at absolute pressure).|
|Maximum Temperature Reaching Time:||Approximately 70 minutes.|
|Interior Material:||Type 304 stainless steel.|
|Exterior Material:||Cold rolled steel plate.|
|Door:||Single swing door.|
Significant features of the ADP-21/31 Vacuum Drying Ovens are as follows:
Precise control in a negative pressure environment.
Microprocessor based three mode PID (Proportional, Integral, Derivative) with precise temperature control... 99% accuracy.
Microprocessor based safety circuit. Thermocouple malfunction is detected by microprocessor and heater is automatically shut off.
Left or right opening door. Thanks to the unique door design which allows for either right or left opening, compensates for space limitation, and provides an extra measure of convenience.
Oven lined with Type 304 Stainless Steel for ease of cleaning.
Valves permit inert gas purge as well as vacuum operation.
The LED provides fast and positive display of operating parameters.
Both SET and MEASURE are controlled and monitored digitally.
Purging with Nitrogen or Argon is facilitated with gas inlet valve.